On-time control of energy flow between PV, battery, and grid
Reduces system complexity and installation cost
Field-tested design with overvoltage, overcurrent, overheating, and short circuit protection
Firmware upgrade and flexible expansion support
Smart, Stable, and Scalable Power Conversion for New Energy Systems
Three-phase Hybrid Grid Energy Storage Inverter is an upgraded-performance product ideal for grid-connected and off-grid energy applications. Adopting advanced DSP control and modular architecture, it coordinates solar energy input, battery storage, and grid interaction to provide stable, constant power for home, business, and industry customers.
No matter what your optimization mode, peak-shaving, backup, or harnessing of renewable energy, this inverter ensures optimized power conversion and smart control with instantaneous response.
Dual PV & Battery Input
Allows parallel input from photovoltaic panels and storage batteries and facilitates smart dispatch of energy.
Three-phase Pure Sine Wave Output
Delivers clean, stable power for use with commercial and industrial equipment.
Flexible Grid Interaction Modes
Operates grid-connected, off-grid, and hybrid modes with auto-switching, delivering power availability in any circumstance.
Seamless Switching
Integrated static transfer switch (STS) for direct switching (<10ms) from grid to off-grid mode.
Advanced Monitoring & Communication
Supports RS485, CAN, Wi-Fi, Ethernet, and optional GPRS/4G remote monitoring.
Scalable & Parallel-Ready
Parallel operation for capacity expansion and redundancy, ideal for large energy systems.
High Conversion Efficiency
Up to 98.2% efficient with smart MPPT algorithm to maximize solar harvesting.
Strong Grid Compatibility
Good tolerance of high voltage and frequency range ensures uninterrupted performance in varied grid conditions.
Commercial & Industrial Buildings
For optimal management of peak load, emergency backup, and optimization of solar self-consumption.
Microgrid & Off-grid Systems
Most suitable for off-grid locations, islands, or places with unreliable grid availability.
Energy Storage Stations
Acts as a master controller in multi-unit large energy storage applications.
EV Charging + PV Systems
Automates solar input and battery output to efficiently charge electric vehicle charging stations.
| Parameter | Specification |
| Rated Power | 10 kW / 20 kW / 30 kW / 50 kW / 100 kW |
| Output Voltage | 3-phase 380/400/415V ±10% |
| Output Frequency | 50Hz / 60Hz auto-adaptive |
| Grid Type | 3-phase 4-wire + PE |
| Efficiency | Up to 98.2% |
| Battery Voltage Range | 150V – 800V DC |
| MPPT Input | 2 independent MPPTs |
| Communication Interface | RS485, CAN, Ethernet, Wi-Fi, optional 4G |
| Operating Temperature | -20°C to +55°C |
| Protection Level | IP65 (outdoor-ready) |
| Cooling Method | Intelligent air cooling |
| Parallel Capability | Yes (up to 10 units in parallel) |
| Certification | CE, UN38.3, IEC/EN standards |
